SSIS:IP Locator:Result Codes

From Melissa Data Wiki
Revision as of 00:12, 14 November 2015 by Admin (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

← SSIS:Data Quality Components

IP Locator Navigation
Overview
Tutorial
Advanced Configuration
Community
On-Premise
Melissa Data Cloud
Dedicated Cloud
IP Locator Tabs
Input/Output
Pass-Through Columns
Output Filter
Result Codes
Result Codes



Result Code Use

Melissa Data's products use a result code system to indicate data quality; the status and any errors. These result codes are four-character codes (two letters followed by two numbers), delimited by commas. Result code definitions are shared among Melissa Data products.

Example

An example returned result code string:

IS01

Instead of looking at multiple properties and methods to determine status, you can look at the output of the results parameter.

From this output you can determine that the address is:

Code Short Description Long Description
IS01 IP Address Found The IP Address was found in the database.

Be sure to reference Result Codes for a list of Melissa Data's result codes.

Understanding the Code

To fully understand result codes, you need to know them. Knowing what codes are possible and what they indicate will be key in building an effective application. It is useful to know all the codes, but this does not necessarily mean you will use them all. Just because you have a toolbox, doesn't mean you will also try to use a screwdriver along with a hammer on a nail.