Issues:Address Object

Address Object known issues.

Data Files

Released February and March 2012

AddressCheck Interface

Commercial Mail Receiving Agency addresses will not be flagged and recognized as a CMRA Address (AS10) for data files pushed out in February (02-2012) and March(03-2012). The USPS, beginning with the February release of the DPV® monthly data fulfillment, P.O. Box™ (PBSA) records were added to the CMRA table without partner notification. As a result, the file size of the CMRA (dph.hsc) table increased from 1 MB to 33 MB. This change has affected the Address Object lookups for CMRA addresses. The next build of Address Object will address and fix this issue. Meanwhile to fix this issue, please replace the dph.hsc files from February/March with the file from January (01-2012) by following the steps below:

1. Download the January CMRA table (dph.hsc)

   ftp://ftp.melissadata.com/Downloads/dph.hsc

2. Replace the file (dph.hsc) into your Melissa Data/Data directory, typically

   C:\Program Files\Melissa DATA\Data

3. Re-initialize the object by restarting any applications using the Melissa Data address object

Build 1609

Released June 2010

AddressCheck Interface

In SQL Server, not all add-ons can be used because of the number of file handles used by SQL Server and therefore less made available to Address Object. Currently, you can only enable PathToUSFiles, PathToDPVDataFiles, PathToCanadaFiles, and PathToRBDI at the same time. The addition of PathToLACSLinkDataFiles, PathToSuiteLinkDataFiles, and PathToSuiteFinderData will cause the stored procedure to not initialize.

Work-Around

Do not use the PathToLACSLinkDataFiles, PathToSuiteLinkDataFiles, and PathToSuiteFinderData add-ons. This will be fixed in the next future build.

Build 1431

Released May 2009

Parse Interface, ZipData Interface

String data stored in variant types are not being recognized in the Parse interface Parse() method and ZipData interface FindZipInCity() methods. For those methods, if you are using a scripting language that contains variant types (VBScript), passing in data of type variant will not work.

Example:

Dim datapath ‘Variant 
datapath = “C:\Program Files\Melissa DATA\COM Objects\Data Files\”
parseObj.Initialize(datapath)

Solution

This will be fixed in the next release. Until then, you can use one of these two work-arounds.

1. Roll back to the previous object
2. Cast the Variant as a string. Example: parseObj.Initialize(CStr(datapath))

Build 1395-1431

Released March 2009

AddressCheck & Parse Interface memory leak

A small 8K memory leak with the IntializeDataFiles() method has been identified and is caused by a missing configuration file that Address Object builds featuring the new parser require. This config file was designed to be hidden and not necessary (it consists of parsing rules) however it is now temporarily required.

Solution

This will be fixed in the next release. Until then please download the configuration file from here and set the attributes to read only and drop the file into your Data Files directory along with the US national data set ie: location of “mdAddr.dat”.

Build 1191

Released September 2007

• AddressCheck Interface

  A few Canadian Addresses are not returning a status code:

Solution

This will be fixed in the next release.

• AddressCheck Interface

  If a valid address is entered in the Company field and invalid characters in the Address field, Address Object will swap them and code the valid address but the company name is lost.

Work-Around

Do not write the Company field back into your data. It will never be changed for corrected.

• AddressCheck Interface

  If an invalid zip code is used and the city field is left blank, Address object cannot code the address because it doesn’t have enough information but it will fill in the city field with the first alphabetical city in the input state.

Work-Around

Do not write the city back into your data if the address does not code. If you want the city for the given zip code even though the address is not valid, you can look it up in the ZipCodeData interface.

Build 1166

Released July 2007

AddressCheck Interface

Valid Canadian addresses that do not have a postal code are incorrectly verifying as an bad address. This only affect Canadian addresses that are street addresses and does not affect any US addresses or Canadian Rural Route, General Delivery, PO Box addresses.

Solution

This has been fixed in the next release. Please download the latest version of Address Object on the main Address Object Support Page.

Build 1115

Released April 2007

AddressCheck Interface

The Canadian Post Office has informed us that a number of records in the Canadian data files for the province of Quebec are missing data for the street direction of approximately 50 streets. In certain cases, previously existing street direction indicators were dropped from street addresses and a few street names were incorrectly modified. The impact of the problem is low and mail processing and mail delivery should not be affected providing the mail piece bears the correct postal code.

Solution

The specific records have since been corrected and will be available in the next release.

Build 1091

Released December 2006

Address Object for Unix does not contain the following properties:

GetCanadianDatabaseDate()

GetCanadianExpirationDate()

• Work-around

  Make sure to update your Canadian data files every time you receive them. They are released each month so if you have not received them for close to on month, please contact your sales representative.

• Solution

  Will be added to the next release.

Build 1021

AddressCheck Interface

Address does not code correctly when duplicate suite information is included in the address and suite fields.

Solution

Fixed in Build 1027.

Build 1019

AddressCheck Interface

Certain LACSLink addresses are not converted correctly.

Solution

Fixed in Build 1021.

Build 1017

• AddressCheck Interface

  Verifying certain company addresses in SQL Server stored procedures will cause a “Floating Point Error.”

Solution

Fixed in Build 1019.

Work-Around

Do not pass the company name into address object to avoid this crash.

• AddressCheck Interface

  GetCassForm method returns jumbled html string if called more than once.

Solution

Fixed in Build 1019.

• AddressCheck Interface

  Canadian Addresses with LVR or rural zip codes will code any city and state as correct.

Solution

We are working with the Canadian Post Office to sort out how to verify LVR and rural zip codes as there are special rules that apply to them.

Build 676

AddressCheck Interface - Certain wild card searches result in only one city being returned when in fact more cities exist.

Solution Fixed in Build 1017

Example: Input CITY: c* STATE: CA

Output C S U Dom Hls - There are 350 cities in CA starting in C.

ZipData Interface - The ComputeDistance & ComputeBearing methods will crash when non-numeric in any of the arguments.

Solution Fixed in Build 1017

Build 613

Address Object experiencing memory leaks in a server environment.

Solution Fixed in Build 676

Address Object experiencing memory leaks in a server environment 

AddressCheck Interface

   1. County Highway
   2. Initialize method
   3. Cold Fusion

StreetData Interface

   1. Initialize method

ZipData Interface

   1. Initialize method
   2. ComputeDistance & ComputeBearing methods

“The format of the DPV Footnotes has been changed to reflect CASS rules as required by the USPS.

DPV DPV Footnotes were previously returned with a space between each footnote. Per CASS rules the footnotes no longer have spaces between them. Each footnote is always two characters in length so interpretation of the footnotes should still be easily done.”

AddressCheck Interface

County Highway Currently County Highway addresses without a range will cause the Address Object to produce a General Protection Fault (GPF.

• Fixed in Build 676

Initialize Method

Address Object will not initialize when the file name is included in the paths passed into the Initialize method.

• Fixed in Build 676

Cold Fusion Warning

The following methods originally added for Cold Fusion users were omitted in the new build of Address Object:

•SetPathToUSFiles •SetPathToCanadaFiles •SetPathToDPVFiles

• Fixed in Build 676

StreetData Interface

Initialize Method Address Object will not initialize when the file name is included in the paths passed into the Initialize method.

• Fixed in Build 676

ZipData Interface

ComputeDistance Method The ComputeDistance & ComputeBearing methods return 9999 & 999 respectively regardless of the input.

• Fixed in Build 676

Initialize Method Address Object will not initialize when the file name is included in the paths passed into the Initialize method.

• Fixed in Build 676