MatchUp Object:Blank Field Matching
This needs a special discussion, as its importance is often overlooked. As discussed above, if this property is on, then the absence of data in both records would indicate a match. If this property is off, then two records with missing data, but matching in every other way, will not match.
The following example demonstrates when Blank set to ON allows a match on a non-critical component. Setting Blank to OFF is recommended for a critical component.
Component | Size | Blank | 1 | 2 |
---|---|---|---|---|
ZIP/PC | 5 | Yes | X | X |
Last Name | 5 | Yes | X | X |
Street # | 4 | Yes | X | |
Street Name | 4 | Yes | X | |
PO Box | 10 | Yes | X |
As described above, this produces the following combinations:
- Condition #1: ZIP/PC, Last Name, Street Number, Street Name
- Condition #2: ZIP/PC, Last Name, PO Box
For this example, take the following records:
Name: | Joe Smith | Suzi Smith |
Address: | 326 Main Street | 405 Main St |
City/State/PC: | Pembroke, MA 02066 | Pembroke, MA 02066 |
The following matchcode keys would be generated:
Cond# | Zip/PC | Last Name | Street # | Street Name | PO Box |
---|---|---|---|---|---|
1 | 02066 | SMITH | 326 | MAIN | |
2 | 02066 | SMITH | 405 | MAIN |
According to these matchcode keys, it is clear that these two records do not satisfy
condition #1. But because blank field matching is selected, they do satisfy condition #2.
The Zip/PC, Last Name, and PO Box are exactly the same. Therefore, the two records do
match.
Obviously, this is not the correct result. Making one change to the matchcode:
Component | Size | Blank | 1 | 2 |
---|---|---|---|---|
ZIP/PC | 5 | Yes | X | X |
Last Name | 5 | Yes | X | X |
Street # | 4 | Yes | X | |
Street Name | 4 | Yes | X | |
PO Box | 10 | No | X |
The same comparison is done for combination #2, but the match is disallowed this time
because the matchcode now indicates that missing (blank) information is not allowed to
figure in the matching condition.
Looking at another example (using the same matchcode):
Name: | Joe Smith | Suzi Smith |
Address: | PO Box 123 | PO Box 456 |
City/State/PC: | Pembroke, MA 02066 | Pembroke, MA 02066 |
This pairing produces the following matchcode keys:
Cond# | Zip/PC | Last Name | Street # | Street Name | PO Box |
---|---|---|---|---|---|
1 | 02066 | SMITH | 123 | ||
2 | 02066 | SMITH | 456 |
This record has the same problem as before, but this time combination #1 is the cause. An even better matchcode would be:
Component | Size | Blank | 1 | 2 |
---|---|---|---|---|
ZIP/PC | 5 | Yes | X | X |
Last Name | 5 | Yes | X | X |
Street # | 4 | No | X | |
Street Name | 4 | No | X | |
PO Box | 10 | No | X |
This is one matchcode that works well. There is one more possible tweak, however: turn on Both Blank Fields for the Street # component. Occasionally, MatchUp Object may encounter records such as:
Name: | Joe Notarangello | Suzi Notarangello |
Address: | Oceanfront Estates | Oceanfront Est. |
City/State/PC: | Pembroke, MA 02066 | Pembroke, MA 02066 |
This reflects a trend in up-scale neighborhoods, where neither street address has a Street # component, though it is very likely these records should match.
So this new, improved matchcode will account for these situations:
Component | Size | Blank | 1 | 2 |
---|---|---|---|---|
ZIP/PC | 5 | Yes | X | X |
Last Name | 5 | Yes | X | X |
Street # | 4 | Yes | X | |
Street Name | 4 | No | X | |
PO Box | 10 | No | X |