Property V4:Result Codes
| Property Navigation | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| |||||||||||||
| |||||||||||||
| |||||||||||||
| |||||||||||||
| Sample Code |
Result Code Use
Melissa products use a result code system to indicate data quality; the status and any errors. These result codes are four-character codes (two letters followed by two numbers), delimited by commas. Result code definitions are shared among Melissa products.
Example
An example returned result code string:
YS02,YS04
Instead of looking at multiple properties and methods to determine status, you can look at the output of the results parameter.
From this output you can determine that the property was:
| Code | Short Description | Long Description |
|---|---|---|
| YS02 | Address Match | An Address match was found. |
| YS04 | Detailed Information | The detailed information was returned. |
Understanding the Code
To fully understand result codes, you need to know them. Knowing what codes are possible and what they indicate will be key in building an effective application. It is useful to know all the codes, but this does not necessarily mean you will use them all. Just because you have a toolbox, doesn't mean you will also try to use a screwdriver along with a hammer on a nail.