MatchUp Web Service:Result Codes
| MatchUp Navigation | ||||||||
|---|---|---|---|---|---|---|---|---|
| ||||||||
| ||||||||
| ||||||||
| ||||||||
| Sample Code |
Result Code Use
Melissa's products use a result code system to indicate data quality; the status and any errors. These result codes are four-character codes (two letters followed by two numbers), delimited by commas. Result code definitions are shared among Melissa products.
Example
An example returned result code string:
MS02,MS06
Instead of looking at multiple properties and methods to determine status, you can look at the output of the results parameter.
From this output you can determine that the business was:
| Code | Short Description | Long Description |
|---|---|---|
| MS02 | Has Duplicates | The record matched other records and was tagged as the output record. |
| MS06 | Match: Rule 1 | Records were matched by matchcode combination 1. |
For more detailed information on Match Rules please see MatchUp Web Service Basic Usage.
Understanding the Code
To fully understand result codes, you need to know them. Knowing what codes are possible and what they indicate will be key in building an effective application. It is useful to know all the codes, but this does not necessarily mean you will use them all. Just because you have a toolbox, doesn't mean you will also try to use a screwdriver along with a hammer on a nail.
Checking Individual Codes
Most of the requests will return a Result Code property = "" (blank string, or no error codes) upon success. But that doesn't mean all MatchUp requests return an error or non-blank code. For example, when a job has been submitted and a request is made for GetJobStatus, a returned GE54 or GE55 tells you the job (could be millions of records) is not yet completed, and that until the job is completed (GE56) you may want to create a loop in your application:
GetJobStatus while (JobStatusResponse.Result NOT "GE56") wait.JobStatusResponse.EstimatedExecutionTime GetJobStatus
This will tell you the Service is now ready for your application to call the Retrieve Records request. Likewise, additional coding should be added to trap result codes where the job has been stopped.